PVC A Profile

Enhance the appearance and functionality of your flooring installation with our PVC A Profile. This flooring accessory is specially designed to provide a smooth and neat transition between flooring surfaces of different heights while covering exposed flooring edges.

The sloped A-shaped design creates a gradual transition from a higher flooring surface to a lower surface. This helps reduce the appearance of uneven flooring levels and prevents exposed flooring edges from being damaged during daily use. It also gives the completed flooring installation a cleaner, safer, and more professional finish.

Made from durable PVC material, the A Profile is lightweight, water-resistant, easy to maintain, and suitable for a wide range of indoor flooring applications. Its practical design makes it suitable for use with SPC flooring, vinyl flooring, laminate flooring, and other similar floor coverings.

The profile is commonly installed at doorways, room entrances, flooring boundaries, and areas where a raised floor meets a lower surface. It can also be used along exposed flooring edges to improve the overall appearance and protect the flooring from impact, chipping, lifting, and daily wear.

Main Functions

The PVC A Profile is designed to:

• Create a smooth transition between floors of different heights
• Cover exposed flooring edges
• Reduce the appearance of uneven flooring levels
• Protect flooring edges from impact and damage
• Improve safety around raised flooring edges
• Provide a clean and professional finish
• Complete the overall appearance of the flooring installation

Product Features

• Made from durable PVC material
• Lightweight and easy to handle
• Water-resistant and suitable for indoor use
• Easy to clean and maintain
• Smooth sloped design for gradual floor transitions
• Helps protect exposed flooring edges
• Provides a neat and finished appearance
• Easy adhesive installation
• Suitable for residential and commercial spaces
• Compatible with various flooring materials
• Long 2.7-metre length for better installation coverage
• Can be cut according to the required installation size

Product Specifications

• Material: PVC
• Profile Type: A Profile
• Length: 2700 mm (2.7 m)
• Top Width: 28 mm
• Height: 8 mm
• Suitable Flooring Thickness: Recommended maximum 5 mm
• Installation Method: Adhesive installation
• Application: Flooring transition, edge protection, gap covering, and height adjustment
• Suitable For: SPC flooring, vinyl flooring, laminate flooring, and other similar flooring materials
• Recommended Usage: Indoor flooring applications

Recommended Applications

The PVC A Profile is suitable for installation in areas such as:

• Doorways and room entrances
• Living rooms and bedrooms
• Offices and commercial spaces
• Retail shops and showrooms
• Flooring boundaries
• Exposed flooring edges
• Areas where SPC flooring meets tiles or other lower surfaces
• Transition areas between rooms
• Renovation and flooring replacement projects

Benefits of Using a PVC A Profile

Using a PVC A Profile helps improve both the appearance and durability of the flooring installation. Without a proper finishing profile, exposed flooring edges may appear incomplete and may be more likely to suffer from impact, lifting, chipping, or daily wear.

The sloped surface provides a more gradual transition between different floor levels, making the flooring edge easier and safer to walk over. It also helps create a more organised and coordinated appearance throughout the room.

The profile covers exposed flooring edges and helps prevent dirt, dust, and debris from collecting around the transition area. It also protects the edges from frequent contact with shoes, furniture, cleaning equipment, and other objects.

The PVC material is lightweight and easy to work with, allowing the profile to be measured and cut according to the required installation length. Its water-resistant surface also makes it easy to clean using a soft cloth, mild cleaning solution, or damp mop.

Installation Instructions

1. Measure the required installation area carefully.
2. Mark the required length on the PVC A Profile.
3. Cut the profile using a suitable cutting tool.
4. Clean the installation surface thoroughly.
5. Ensure the surface is dry and free from dust, dirt, oil, and debris.
6. Apply a suitable adhesive evenly along the installation area or the underside of the profile.
7. Position the A Profile carefully over the flooring edge.
8. Press the profile firmly into place.
9. Remove any excess adhesive before it dries.
10. Allow sufficient time for the adhesive to cure before walking over the installed area.

Installation Recommendations

For the best installation result, ensure that the flooring edge is properly aligned and securely fixed before installing the profile. The installation surface should be flat, clean, and dry to help the adhesive bond properly.

Use an adhesive that is suitable for PVC material and the installation surface. Avoid using excessive adhesive, as it may spread beyond the edges of the profile during installation.

Check that the width and height of the profile are suitable for the flooring before installation. The profile should cover the exposed edge properly and provide a smooth transition to the lower surface.

Professional installation is recommended when the flooring surface is uneven or when additional floor adjustment is required.

Care and Maintenance

The PVC A Profile is easy to maintain. Clean the surface regularly using a soft cloth, mild cleaning solution, or damp mop.

Remove dust and dirt from the flooring transition area regularly to maintain a clean appearance. Wipe away water or spills to prevent dirt from collecting around the edges.

Avoid using harsh chemicals, abrasive cleaning tools, metal brushes, or sharp objects that may scratch or damage the surface. Regular cleaning will help maintain the appearance of the profile and keep the flooring transition area neat.

Important Notes

• Measure the installation area before placing an order.
• Confirm that the 28 mm width and 1-6 mm height are suitable for your flooring application.
• Recommended for flooring with a maximum thickness of approximately 5 mm.
• The profile may be cut to the required installation length.
• Use a suitable adhesive for secure installation.
• Minor measurement differences may occur due to the manufacturing process.
• This product is intended mainly for indoor flooring applications.
• Professional installation may be required depending on the condition and level of the flooring surface.

The PVC A Profile is a practical finishing solution for improving floor transitions, protecting exposed edges, and creating a cleaner, safer, and more professional flooring appearance.

Actual product colour and surface appearance may vary slightly due to lighting, photography, production batches, and screen display settings.